Every child, much like adults, enjoys getting false nails. Nowadays, children may choose from a variety of press-on nails. If your child is going to get false nails, it is critical to determine the size of his or her natural nail. Therefore, this article will teach you how to correctly measure your child’s nails.
Using masking tape, determine the length of your child’s nails.
This is one of the simplest and most successful methods for measuring your child’s nails. You may have difficulty measuring their nails, but this is the best approach.
A Washi/Masking tape, a fine tip marker, a ruler, and a sheet of paper are required for this approach.
Place your child’s left hand on a sheet of paper. Now, on the plain page, write the initial letter of the finger. For instance, The pinky finger should be labeled P, the index finger should be labeled I, the middle finger should be labeled M, the ring finger should be labeled R, and the thumb should be labeled T. Carry out the same procedure with your child’s right hand.
After that, apply the masking tape to the broadest section of your nail. Assure that the tape adheres effectively to the sidewalls as well. This will assist you in obtaining an accurate measurement.
After firmly adhering the tape on your child’s nail, use a tiny tip marker to outline the sidewalls. Utilizing a fine tip marker can assist you in obtaining the proper measurement. Otherwise, the line’s thickness will have an effect on your measurement. Repeat the procedure for the remaining nails as well.
After completing the preceding procedure, remove the adhesive tape from your nails and put them on the paper where you marked the initial letter of each finger. Now, using a measuring tape or ruler, begin measuring the masking tape’s indicated section.
This phase requires more concentration, since errors are readily made here. When measuring the designated portion of the masking tape, avoid starting with the pen mark. Therefore, your attention should be drawn to the region between these two lines. Additionally, remember to measure in millimeters. On the notepad, jot down the length of each nail.
Utilizing the measuring tape, determine the length of the child’s nails.
You may simply measure your nails with a standard measuring tape if you have one. All you need to do is establish a starting point and determine the length of your child’s nails. While this procedure seems to be straightforward, the metal base end complicates measurements.
These two techniques will assist you in accurately determining the length of your child’s nails. Keep in mind to measure the nails on both hands when doing this task. Occasionally, the nail size differs somewhat between hands. As a result, it is usually a good idea to take measurements of both hands.
The time has come for you to speak. Which technique will you use to determine the length of your child’s nails? We offer a variety of press-on nails available for you to test. Now is the time to peruse our selection of press-on nails.